Monitoring Wbadmin (old Ntbackup) using Nagios

Monitor SonicWall TZ-210 with Nagios using SNMP

SonicWall uses a custom written Linux OS called SonicWall Enhanced Enabling SNMP in From nagios you can monitor the following without any setup involved from SonicWall

TO MONITOR SONICWALL FROM NAGIOS USING SNMP 1. Enable SNMP on SonicWall on all network interfaces 2. Download mibs from >>> http://www.plixer.com/support/mib_resources.php 3. TEST from Nagios snmpwalk -v1 -c public xxx.xxx.xxx.xxx ---> to view response from device YOU DO NEED! You DO need the IP address of the system/software that’s monitoring the SNMP does have to be entered on the SNMP configuration page. You DO need the checkbox on the network interface page does have to have SNMP checked. You DO NOT need to create a firewall rule allowing SNMP traffic from LAN to LAN on the firewall. When it’s configured correctly, it auto-creates one that you can’t change. You DO have to use the SonicWALL MIBs that are specific to each model of firewall.

Error: Could not find any hostgroup matching *******

Hostgroup defined in templates.cfg Hostgroup defined in hostgroups.cfg hostgroup defined in